DBPM-IV SF6 Gas Analyzer

Product Introduction

For successful SF6 Gas Recycling and Reuse it is essential to know three impurity values. These are:

l  Purity of SF6 Gas

l  Moisture Content

l  Concentration of SF6 Decomposition Products

DBPM-IV SF6 Gas Analyzer can analyze those three values, therefore providing a very convenient way to determine the reusability of SF6 gas and on-site validation of recycling efforts.

This analyzing meter can finish three measurements one time so saving gas used and reducing air pollution.

This meter adopts world famous sensors from overseas. Sensor for moisture is from Finland; Sensor for purity is from Germany; Sensor for decomposition products is from UK special for SF6 gas.

Product Features

l  Long service time

l  Multiple measuring methods to meet different requirements

l  Built-in gas filter and pressure maintaining valve

l  Large-size liquid crystal display, easy operation

l  User can calibrate on site

l  Easy operation with touch screen

l  Simultaneous display of all data

l  Large capacity of data storage

Technical Specifications

Main specs

1. Measurement range

a.     Humidity: Polymer thin film, dew point -80℃～+20℃

b.     SF₆ purity：0~100%SF₆（weight ratio）

c.        1) SO₂: 1~150ppm

 2) CF₄: 1~60% volume

 3) HF: 0~200ppm

2. Measurement accuracy

d.     Dew point：±0.5℃（If below 0℃，sensor displays frost point）；

e.     SF₆ purity：±0.1%，irrelevant of flow

f.         1) SO₂: ±2%

 2) CF₄: ±1%

 3) HF: ±5%

Other specs

Inlet pressure：≤1.0Mpa；

Operation temperature：-30~+50℃；

Environment temperature：≤90%RH；

Charging voltage：220VAC±10% 50Hz；

Using time length：no less than 8 hours of continuous work

Storage capacity：60 groups；

Dimensions：360mm×350mm×160mm；

Weight：4.8Kg；

Operation method：touch input

Output interface：USB2.0 communication connector，direct connection with laptops

Printing method: supporting AC printing